CLASSIFICATION
FESTO travel switch Festo SMT-8M-A-PS-24V-E-2,5-OE
FESTO travel switch Festo SMT-8M-A-PS-24V-E-2,5-OE
574335
SMT-8M-A-PS-24V-E-2,5-OE
Features: Magnetic, contactless, suitable for T-shaped slots.
DESCRIPTION
| Design | Used for T-slot |
| Based on standards | EN 60947-5-2 |
| to grant authorization |
RCM Mark c UL us - Listed (OL) |
| CE symbol (see applicable standards) |
According to the EU-EMV guidelines Compliant with the EU RoHS Directive |
| KC mark | KC-EMV |
| Special characteristics | Oil resistance |
| Material remarks |
Does not contain brass and PTFE Compliant with RoHS Excluding halogens |
| Measure variables | position |
| Measurement principles | reluctance |
| ambient temperature | -40 ... 85 °C |
| Repetitive accuracy | 0.2 mm |
| Switch output | PNP |
| Switching component functions | Normally open contact |
| Opening time | <= 1.3 ms |
| Closing time | <= 1.4 ms |
| Maximum switching frequency | 180 Hz |
| Maximum output current | 100 mA |
| Maximum output current in the installation component | 100 mA |
| Maximum contact capacity DC | 2.8 W |
| Maximum switching capability DC in installing components | 2.8 W |
| Voltage drop | < 1.5 V |
| Short circuit strength | yes |
| Overload bearing capacity | Already available for supply |
| Rated working voltage DC | 24 V |
| Working voltage range DC | 5 ... 30 V |
| Polarity fault-tolerant protection | For all electrical interfaces |
| Electrical interface 1, interface type | Cable |
| Electrical Interface 1, Interface Technology | Open End |
| Electrical interface 1, number of pins/wires | 3 |
| The direction of the wire lead out of the connector | axial |
| Testing conditions for cables |
Bending strength meets Festo standards The testing conditions are determined according to the needs Installation of drag chain: 5 million cycles, bending radius of 28 mm Anti torsion:>300000 cycles, ± 270 °/0.1 m |
| Cable length | 2.5 m |
| Cable properties | Energy Chain Robot |
| Cable jacket color | grey |
| Material information, cable sheath | TPE-U(PUR) |
| Installation type |
After tightening Can be inserted into the slot from above |
| Maximum tightening torque | 0.6 Nm |
| Assembly position | arbitrarily |
| Product weight | 29.1 g |
| Shell color | black |
| Material information, shell |
PA - Strengthen High alloy steel, corrosion-resistant |
| Work status display | Yellow LED |
| Function reserve display | LED Orange |
| Environmental temperature during installation with elastic cables | -20 ... 85 °C |
| Protection level |
IP65 IP68 IP69K |
